365体育开户

汽车电热抱枕毯,汽车电热方向盘套,座椅加热垫
Contact Risheng
National consultation hotline: 4008-571-678

Phone: 0571-86263545

Fax: 0571-86263330

Email: risheng@xfkc1.com

Address: No. 2 Road, Chenjiamuqiao Industrial Zone, Linping, Yuhang District, Hangzhou , Zhejiang Province

What are the production reasons, composition and advantages of multi-purpose cushions [12-09 09:53]
What are the reasons, composition, and advantages of multi-purpose cushion quilt production? To solve the above-mentioned problems, Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. has produced a cushion quilt that is easy to use and can be used for both quilts and cushions. This multi-purpose cushion quilt includes a cushion body and a quilt connected together, and is characterized in that the cushion body is composed of a front surface and a back surface that can be deployed or closed together, and is arranged at the center of the quilt deployment state after deployment. The inner and outer layers of the front and back are connected to the outer surface of the quilt. After the quilt is folded, it can be placed inside the closed cushion body. The front and back edges are connected by a zipper. A handle is provided on the outer surface of the cushion body, that is, the front or the back. The handle is a soft material cloth body, which is convenient for the cushion to be carried after being closed into the cushion. The front and back are square, and the outer surface of the quilt is provided with a crease line, which is convenient for guiding the user to stack and store the quilt along the crease, preventing the wrong folding method from causing additional expansion force to the cushion body. The outer fabric of the cushion is made of 100% combed cotton printed fabric, which has good abrasion resistance, delicate and soft, healthy and safe.
What are the composition and advantages of automobile electrothermal magnetic therapy seat cushions [12-09 09:26]
What is the composition and advantages of automotive electrothermal magnetic therapy seat cushions? Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. produces an automotive electrothermal magnetic therapy seat cushion to overcome and solve heating and health problems; automotive electrothermal magnetic therapy seat cushions are composed of seat cushions. , Backrest, heating wire, magnetic sheet, insulation sleeve, insulation sleeve, cover, power distribution box, power cord and power plug, the inner pads installed with heating wire, magnetic sheet and power distribution box are placed in the insulation sleeve, The insulation sleeve is covered with an insulation sleeve and a cover in order to form a seat cushion and a backrest; the rear end of the seat cushion and the lower end of the backrest are sewn together, and the electric heating wire in the seat cushion and the backrest is connected to the other end through a power distribution box with a power plug. The power cord is connected; the car electrothermal magnetic therapy seat cushion is placed on the driver's seat to achieve heating and health care functions. The car electrothermal magnetic therapy seat cushion has the beneficial effects and advantages of simple structure, easy production and heating and health care.
What are the causes and components of the production of automotive electric seat covers [12-09 09:06]
What are the reasons and components of the production of automotive electric seat covers? To overcome the above-mentioned shortcomings, Zhejiang Hangzhou Risheng Electric Products Co., Ltd. produces a heating, temperature control, moisture absorption, far-infrared function suitable for assembly line operation, low cost, easy installation Car electric heated seat covers or cushions. This kind of automobile electric heating seat cover or seat cushion mainly comprises a seat cover or seat cushion, a carbon fiber electric heating pad sewn in the seat cover or seat cushion, and a control system. The structure of the carbon fiber electric heating pad is made of 12V carbon fiber strands in a mesh shape and sewn and fixed on a flame-retardant non-woven fabric. Copper-based silver-plated strands are arranged at the ends of the carbon fiber mesh in a sine wave form. The self-control module is connected in series through two wires and a carbon fiber mesh and leads out two wires for connecting the circuit, and the above unit is packaged with a special carbon cloth and a flame-resistant textile. The carbon fiber electric heating pad adopts open-thread sewing method, and is sewn in a seat cover or a seat cushion with perforated leather or textile material as the surface layer and a sponge as the inner lining layer. The control system consists of a switch, a thermal temperature automatic control module, a relay, and a fuse.
What are the reasons and components of the production of 3D splicing special car seat covers [12-09 08:52]
The reason and structure of the production of 3D splicing special car seat covers are as follows: Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. produces a 3D splicing special car seat cover, which solves the problem that the existing seat cover cannot completely replace the car. The seat bag is tight and easy to cause the problem that the seat is soiled. This 3D splicing special car seat cover includes two parts, a seat cover and a seat cover. The seat cover and the seat cover both include a quadrangular middle block, and the three sides of the middle block are connected to the middle block side wall. There is an angle between the middle pieces, and the side edges of the middle pieces are connected to the side pieces by connecting edges. The side edges, connecting edges, and side pieces of the middle pieces are angled in a clockwise direction in turn. A pair of headrests are opened on the side pieces of the cushion. Special holes, a pair of special holes for headrests are distributed on both sides of the axis of symmetry of the side block.
What are the characteristics and composition of car seat cushions with bamboo charcoal liners [12-09 08:34]
What are the characteristics and composition of car seat cushions with bamboo charcoal liners? Because bamboo charcoal is used as a filler, the superior absorption, dehumidification, deodorization, sterilization and bacteriostatic properties of bamboo charcoal make the seat cushions breathable and hygroscopic. Strong, can eliminate odor and bacteriostatic pollution-free, and can eliminate air pollution in the car; because the bamboo charcoal itself has biological infrared rays, the occupants can improve blood circulation, which is beneficial to physical health and the prevention of bedsores; and because the surface of bamboo charcoal cloth is flat (The bamboo charcoal powder in the middle layer is evenly distributed), so the seat cushion made is still soft and comfortable; it can also be widely used in various households.
What are the reasons and advantages of producing strong magnetic waist pads and seat belts [12-08 09:49]
What are the reasons and advantages of the production of strong magnetic waist pads and seat belts? Zhejiang Hangzhou Risheng Electric Products Co., Ltd. produces a strong magnetic waist with a high magnetic field, high structural stability, and better health care. pad. This strong magnetic waist pad includes a main support pad, and the main support pad is provided with a reinforced positioning card opening hole opened in the front to the back direction of the main support pad. The back side is provided with a strip-shaped skeleton metal sheet. The projection of the ferromagnetic particles on the projection surface of the main support pad from the front to the back direction accounts for 50% of its total area, and the skeleton metal sheet is from the front to the back direction of the main support pad. The entire projection on the projection surface coincides.
What are the causes and components of car seat cover production [12-08 09:32]
What are the reasons and composition of the production of car seat covers? In view of the above defects, Zhejiang Hangzhou Risheng Electric Heating Products Co., Ltd. produces a car seat cover that can be easily replaced and disassembled, and can prevent deformation under stress. The car seat cover includes a seat cover and a back cover installed on a seat. The key is that the seat cover is covered with a seat cushion, and the seat cushion and the seat cover are detachably and fixedly connected around the edge of the seat base. The front of the cover is covered with a back cushion. The back cushion and the back cover are detachably fixedly connected around the edge of the seat back. The seat cover is fixedly provided with a seat cushion adhesive tape, which is used for detachably bonding the seat cushion. A back pad adhesive tape is fixedly arranged on the backrest cover, and the back pad adhesive tape is used for detachably bonding the back pad.
What are the reasons, composition and characteristics of the production of multi-functional chair covers [12-08 09:13]
What are the reasons, composition, and characteristics of the production of multi-functional chair covers? According to the existing defects, Zhejiang Hangzhou Risheng Electric Products Co., Ltd. produces a multi-functional chair cover. The cushion provided at the waist can increase the comfort of the waist, relieve people's long-term driving fatigue, and play a good role in health care of the lumbar spine. The multifunctional chair cover comprises a chair cover body and a waist cushion provided at the middle of the front part of the chair cover body. The back and sides of the seat cover body are provided with storage bags, which can be used for car newspapers, car magazines, water cups and other daily necessities. The upper part of the seat cover body is provided with an adhesive opening, and the lower part is provided with a fixing tie. The lumbar cushion provided in the middle of the front part of the seat cover body can be provided with multiple cushion structure combinations to meet the comfort requirements of different drivers, alleviate people's long-term driving fatigue, and play a good role in health care of the lumbar spine.
How does the automatic massage seat and seat cover for automobile work [12-08 08:58]
How does the automatic massage seat and seat cover for automobiles work? The currently installed seats, bamboo and plastic seat cushions, cool pads, and inflatable cushions cannot solve the dynamic and static pressure relationship between the limbs and the seat, and the driver's fatigue cannot be obtained. improve. Often feel numbness in the lower limbs, inflexible response, prone to drowsiness while driving, causing driving errors and accidents. An automatic massage seat and seat cover for automobile produced by Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. can provide a certain amount of massage to the driver while driving, which can eliminate or reduce some driving fatigue. Automatic massage seat and seat cover for automobile. The seat and seat cover are respectively covered on the seat and the seat back. The three-way valve is connected to the air compressor. The two sets of rubber tubes in the seat and seat cover are moved to the left and right of the indoor piston by reversing. The pressure in the seat and the seat cover is alternately transformed, and the pressure on the human limb is completed, and the massage work is completed, and the blood circulation is promoted to relieve the fatigue of the limb.
What are the production reasons and structural characteristics of car seat covers with waist guards [12-08 08:43]
What are the production reasons and structural characteristics of automobile seat covers with waist protectors? Zhejiang Hangzhou Risheng Electric Products Co., Ltd. overcomes the defects of the existing technology and produces a simple and reasonable structure that can effectively reduce waist fatigue and lumbar muscles brought by driving. Car seat cover that can prevent strains and prevent lumbar diseases and protect the waist and spine. The car seat cover with a car waist protector includes a seat cover body. The structural feature is that a car waist protector is also provided at the seat of the seat cover waist. The car waist protector includes an arc-shaped surface layer and a padding located in the surface layer. Floor. The curved surface layer can support the waist that is bent and suspended when driving, prevent and treat waist diseases and protect the lumbar muscles. The filling layer is made of soft space cotton, so that the waist muscles can be stretched well, and there will be no muscle pressure. There are also several magnetic stripe drug claddings between the curved surface layer and the filling layer. The magnetic stripe drug cladding consists of a magnet and a health care agent. It can provide proper magnetic field and medical massage to the waist of the human body, and reduce fatigue caused by driving or driving.
What are the composition and characteristics of health car seat covers [12-07 10:16]
What are the composition and characteristics of health car seat covers? In order to solve the poor comfort of existing car seat covers, the appearance is unique, and it does not have the deficiencies of health care functions. Zhejiang Hangzhou Risheng Electric Products Co., Ltd. has produced a Car seat cover with unique appearance, strong comfort and health function for human body. A health car seat cover includes a cushion and a seat cushion, which is characterized in that the cushion and the seat cushion are made of a plurality of convex materials distributed. The material is divided into a surface layer and a middle layer, and the surface layer and the bottom layer are made of cloth or leather. Cut out, the middle layer is composed of sponge, silk cotton or latex foam material with a convex shape on the surface. The surface layer, bottom layer and middle layer are tailored according to the shape and size of the car seat. Because the car seat cover has several protrusions distributed on the surface, it has an automatic massage function on the seat, which improves the comfort better, and also increases the beauty and practicality of the car seat, achieving higher Unique appearance, comfort and health benefits.
What are the causes and composition of the fast-heating seat heating pads [12-07 10:00]
What is the reason and composition of the fast-heating seat heating pad? For this reason, Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. produces a fast-heating seat heating pad with rapid heating and temperature regulation. This fast-heating seat heating pad includes a seat cushion body, which is formed with a "V" shaped protrusion for insertion into a slot of a car seat, and two sets of heating wires of different powers are installed in the seat cushion body. One set of heating wires is 0.5 ohm / meter, and the other set of heating wires is 0.9 ohm / meter. The two sets of heating wires are all distributed in the body of the cushion. Each group of heating wires is electrically connected with a thermostat, and the outside of the cushion body There is also an electrical connector. The electrical connector is electrically connected to the heating wire and the thermostat through a wire; the heating pad is heated by two different heating wires, one of which uses a heating wire of 0.5 ohm / meter, and the other The heating wire of the group uses a heating wire of 0.9 ohm / meter; within the first minute of the heating pad working, the two heating wires work at the same time, so that the effect of rapid heating will be achieved. When the temperature reaches the preset temperature, the temperature controller is turned off, and only one type of heating wire is left to work. The user can also select which group of heating wires to work according to the needs, which is environmentally friendly and energy saving.
What are the production reasons, composition and characteristics of high-efficiency heat-dissipating car seat heating lines? [12-07 09:44]
What are the reasons, composition, and characteristics of the production of high-efficiency heat-sinking car seat heating lines to overcome the above-mentioned shortcomings? This high-efficiency heat-dissipating car seat heating wire includes an internal bullet-proof wire. The outer surface of the bullet-proof wire is wound with a flat wire. The flat wire is a heating alloy wire. The outer part of the flat wire is covered with a sheath. The wire makes surface contact, and the flat wire makes surface contact with the sheath. The cross section of the flat wire includes an upper straight line segment, a left arc segment, a lower straight segment, and a right arc segment connected in order. The upper straight segment and the lower straight segment are arranged in parallel up and down, and the left arc segment and the right arc segment are bilaterally symmetrical. The left and right arc segments are arranged with the convex surfaces outward. When the flat wire is wound on the bulletproof wire, the lower straight section of the flat wire makes surface contact with the outer surface of the bulletproof wire, and the sheath is covered with the flat wire. On the outside, the upper straight section of the flat wire makes surface contact with the inner wall of the sheath. The high-efficiency heat-dissipating car seat heating wire has increased strength, good heat resistance, uniform heating, and has the advantages of high heat dissipation efficiency, superior oxidation resistance, high surface load, and long service life. In addition, the contact surfaces of the flat wire with the sheath and the bulletproof wire are in surface contact, so the contact area is increased.
What are the reasons, composition and characteristics of automobile heated seats production [12-07 09:26]
What are the reasons, composition and characteristics of the production of heated seats for automobiles? In view of the shortcomings of the existing technology, Zhejiang Hangzhou Risheng Electric Heating Products Co., Ltd. produces a high-efficiency, healthy, energy-saving and environmentally-friendly automobile seat. This heated seat for a car includes a seat cushion, a backrest, and a pillow. A heating device is installed and fixed in the seat cushion. The heating device includes a carbon crystal electric heating film, a current controller, a temperature controller, and a switch connected in series by a power cord. , The heating device is integrated into the car's entire vehicle circuit through the power cord. Carbon crystal electric film heating is used to replace the traditional electric wire heating. The conversion efficiency of electric energy is more than 98%, which not only saves electricity, but also has high thermal efficiency and fast heating. It also transmits heat through infrared rays, which not only generates heat uniformly, but also improves the human body. The micro-circulation promotes metabolism and improves human immunity, and the temperature controller is equipped with a digital display function and a temperature overheating protection device, which is not only practical, but also greatly improves safety.
What are the production reasons and composition of car seat cover [12-07 09:02]
What are the reasons and composition of the production of car seat protectors? In response to the above defects, Zhejiang Hangzhou Risheng Electric Products Co., Ltd. produces a good fit with the human body, can better fix the body, effectively prevent shocks and sharp turns, and is conducive to Car seat cover for long-term driving comfort. The car seat cover includes a cover body, a hard plate, a soft stop, a soft convex strip, and a buckle; the cover body is a soft sandwich structure in which a hard plate is fixed; a protective cover The middle part of the surface of the body is provided with two soft stoppers symmetrically, and the lower part is provided with a transverse strip-shaped soft convex strip; the protective cover body is connected by one or more buckles to form a closed hollow structure. The buckle is a multi-position buckle, the hard plate is a hard rubber plate, and the soft stoppers and soft ridges are of a high-resilient sponge structure. The fit with the human body is very good, it can fix the body well, effectively prevent the adverse effects of vibration and rapid rotation on the human body, and greatly improve the comfort during long driving.
What are the causes and composition of temperature-controlled electric heating belts [12-06 09:56]
What is the reason and composition of the temperature-control electric heating belt? The new-designed temperature-control electric heating belt mainly includes an upper surface layer and a lower surface layer. A heating wire is arranged between the upper surface layer and the lower surface layer. The upper surface layer Both the upper and lower surface layers are elongated, and the width at the middle position is greater than the width at both ends. At one end of the upper surface layer, there are vertical and horizontal mother-child stickers from the end to the middle. The opposite end of the upper surface layer is provided with a horizontal mother-child sticker. This structural feature makes the width of the middle position larger, which can increase the protective area of the waist and make the waist effect better. Moreover, there is a horizontal daughter patch and a vertical daughter patch on one end, which is horizontal with the other end. The mating of the son and the mother makes the sticking more firm and the shrinkage range is large. The heating wire is connected to the temperature control switch, and the temperature control switch is connected to the plug. It can realize the precise control of the heating wire temperature and improve the performance. The temperature-controlled electric heating belt has a large width in the middle position, which can increase the protective area of the waist and make the waist protection effect better. Besides, there is a horizontal mother-child sticker and a vertical mother-child sticker at one end, which is horizontal with the other end. The mating of the son and the mother makes the sticking more firm and the shrinkage range is large. At the same time, the temperature of the heating wire can be controlled by the temperature control switch.
What are the causes, composition and characteristics of electric heating waist supporter [12-06 09:40]
What are the causes, composition, and characteristics of the electric heating waist protector? Zhejiang Hangzhou Risheng Electric Heating Products Co., Ltd. overcomes the shortcomings of the existing technology and produces an electric heating waist protector for heating through an electric film. Compared with the existing electric heating protector, The waist has the advantages of safety, comfort and easy cleaning. An electric heating waist protector includes a waist protector, which is provided with buckles at both ends of the waist protector to buckle each other around a human waist, and further includes a heating element; the waist protecting element is provided with a heating element mounting bag, and the heating element mounting bag is provided with There is an opening for the heating element to be inserted into or pulled out; the heating element includes an electric heating film and a cloth cover, the electric heating film is provided with a power cord, and the cloth cover completely encloses the electric heating film and is provided with a small hole for the power cord to pass through. The electric heating film is used to heat the waist supporter to achieve the effect of warmth. Compared with the traditional resistance wire, the electric heating film generates more uniform heat and softer materials, which improves the comfort of the product. At the same time, the heating body can be detachably installed On the waist guard, when the waist guard needs to be cleaned or the heating film needs to be replaced, the waist guard can be cleaned or replaced only by taking out the heating body, which is safer, more reliable and convenient to use.
What are the causes and components of electric knee pads for electric vehicles [12-06 09:18]
What are the causes and composition of electric knee pads for electric vehicles? In order to solve the above problems, Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. has invented an electric knee pad with simple and reasonable structure, convenient and effective use. Set several rectangular cloths to combine them into one, set electric heating wire in the interlayer between cloth and cloth, and set a section of wire to connect with the electric heating wire. Two sides of the two sides of the rectangular cloth are respectively connected with two Three triangular pieces of cloth are connected vertically, thus forming a semi-curved cover, such as a dustpan, which can cover a large area of the legs of the electric rider, including the knees. Since the legs of the person are close to each other at this time, they can mutually warm each other and prevent outside air from invading. In order to avoid affecting the ground support with feet when parking, an elastic cloth is provided at the lower part of the cover. In order to prevent the cover from falling off easily, two elastic hooks are provided on the upper part of the cover to hang on both ends of the electric vehicle seat respectively, so as to form a simple knee pad. When the wire is connected to the power source of the electric vehicle during use, the knee pads can be heated, thereby achieving a better warming effect.
What is the structure of thermoelectric knee pads [12-06 08:55]
What is the structure of temperature-adjusting electric knee pads? At present, there are many elderly people suffering from arthritis because of cold weather and humid air. Most knee pads are knitted products, which cannot fully keep warm, and some electric knee pads do not keep warm for a long time, or cannot adjust temperature. . Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. overcomes the above disadvantages and produces a thermoregulated electric knee pad. The new type of temperature-adjusting electric knee pads includes the inner and outer layers of the knee pads. There are two electric heating wires AB and transfer switches between the inner and outer layers of the knee pads. The two electric heating wires AB are connected to the transfer switches and power lines. The hot wires AB are placed in parallel at a certain distance. The transfer switch can change the connection method of the electric heating wires, that is, the two electric heating wires have parallel, serial and separate connection methods, plus a gap, so as to change the power consumption of the electric heating wires. It also achieved the purpose of temperature adjustment. Temperature-controlled electric knee pads, two of which are two electric heating wires of the same specifications. The inner and outer layers of the knee pads are made of artificial leather and various types of fabrics. Temperature-adjusting electric knee pads, in which both ends of the knee pads can be connected by buttons or zippers, or by straps or elastic bands. The connection circuit can also be used for electric slippers and electric warm clothes.
What are the composition and characteristics of the windshield of a heated electric vehicle [12-06 08:45]
What are the constitution and characteristics of heated electric vehicle windshields? In response to the existing shortcomings of windshields, Zhejiang Hangzhou Risheng Electrothermal Products Co., Ltd. produces a heated electric vehicle shield that has a simple structure, is not easily damaged, and has good heating and insulation effects The wind was. A heated electric vehicle windshield includes a windshield body and gloves with an integrated structure, and the windshield body and gloves include a cotton layer, a quilted layer, and a waterproof layer in order from the inside to the outside. Electric heating wire; the electric heating wire is connected with a conductive outer wire provided outside the windshield, and the conductive outer wire is connected with a tee interface through a relay switch; a thermostat is arranged in the relay switch, and the temperature range of the thermostat is 30-40 °. The electric heating wire covers the entire windshield body and gloves, and the distribution mode is side-by-side arrangement and mesh arrangement. The housing of the relay switch is provided with a connecting plate, the connecting plate has bolt holes, and the free ends of the U-shaped clamps are mated and connected with the bolt holes, respectively. Heated electric vehicle windshield is simple in structure, easy to fold, not easy to damage, easy to maintain, long service life, low production cost, low sales price, suitable for consumers at all levels.
1 2 3 4 5 6 7 8 9 10 ...> Total records: 487 | Pages: 25 1 2 3 4 5 6 7 8 9 10 ...>   
日盛官方微信二维码日盛官方APP客户端